0 in Cart
subtotal: $0.00
Additional Images

1999 Only Super Duty 4WD Track Bar Repair Bracket

1999 Only Ford Super Duty F250, F350, Ecxursion 4WD, and F450, F550 track bar repair kit.
Pricing: $275.00


This part fits only 1999 trucks. Ford Super Duty, Excursions and F450/550 trucks built in 1999, all had leaf spring front suspension that utilized a track bar to help control the front-end housing and improve steering response. Ford's track bar bracket was under designed and has been known to crack and break off of the front housing. Fords’ solution to repair this is to replace the entire housing as the track bar mount is welded onto the front end. At a cost of nearly $2000 for a housing and then a significant labor bill, this is an expensive choice.

Autofab has created the "Super Duty Ford Track Bar Repair Kit" to solve this problem. Our repair kit is manufactured from two layers of 1/4" thick steel and is significantly stronger and better designed than the original Ford part. Our repair kit requires removing the remainder of the original track bar mount and welding on the track bar nut location tab. A qualified technician should perform this work. There are instructions for the work provided here.

Some of the Super Duty 4X4 trucks and Excursions use a steering stabilizer. If your truck has this, you will need our Super Duty steering stabilizer mount. We purposely built this part separately and it is available here.

We have found that the main cause of the mount failing is the loading of the track bar to one side. After our repair kit is installed, the track bar should bolt in without pushing the front end over. Autofab now offers an adjustable track bar to solve this issue. If you need our adjustable track bar, click here.

If your spring perch and sway bar mount is damaged, we have a solution for that. Click here.


  • FTGK-200
  • FTGK-200
  • New

Shipping Information

  • Item Requires Shipping
  • 19.0 lbs.

Share 1999 Only Super Duty 4WD Track Bar Repair Bracket on Facebook