These Ranger 2wd beam pivot brackets lower the pivot 2 inches and move them 2 inches per side, 4 inch total width increase. This allows for 6 inch lift using standard Autofab 4 inch bent beams along with 6 inch lift coils. Track width increase of 4 inches will require fiberglass fenders. You must lengthen or fabricate new adjusting sleeves or modify F150 tie rods. Must use The FD400 drop pitman arm with these brackets. This kit is not compatible with stock length radius arms. Autofab can supply F150 tube radius arms, hangers, and rod ends for best results.