Ford Bronco / F150 4wd Wide Track Front End

Description

Extra-wide front TTB housings 6″ total track width increase. Housings come fully welded on an exchange basis. Mono ball ends installed, 1/4″ plate reinforcement to pivot ends boxed in. Alignment corrected for a 4-inch lift from stock pivot brackets. Must use fiberglass fenders. Two 4130 chrome moly axles included. Use stock outer axles. Optional front truss available for an additional $500 cost. The picture is shown with optional radius arms and hangers available for an additional $1600 cost. Core fee of $800 is additional if you cannot send your housings. Note: Radius arms are located on the housings in the stock position, Housings are widened after the radius arm mounts.