Home / Shop / Suspension Kits / 1965 - 1979 Ford F Twin-I-Beam 2 Wheel Drive Suspension / 1965 – 1979 F100 / F150 2 Wheel Drive Truck 3 Inch Economy Lift

1965 – 1979 F100 / F150 2 Wheel Drive Truck 3 Inch Economy Lift

3-inch economy lift for 1965-1979 ford F100/F150 2WD trucks.

Shipping is calculated and billed separately. You will be contacted after your order is placed.

Description

Autofab starts each lift by first installing new beam pivot bushings and then straightening the beams to their original condition. The beams are then bent for both camber and caster alignment using Autofabs strict specifications. All of Autofabs ’65-79 Twin I Beam lifts include our own adjustable tie rod. This tie rod allows proper toe-in adjustment of both wheels independently of one another while keeping the steering box in the center of its’ travel. Recommended tire size with the 5-inch lift is 33 to 35-inch tall tires.

A core charge may apply to this kit.

This lift requires either a core charge and return of your good used beams, or your good used beams for us to perform the work on. If you would prefer for us to bend and return your beams then a core charge doesn’t apply. But you will need to send us your beams first. Turn around is usually 3 to 4 weeks. excluding shipping time.

Please note, this is a non-stocking item, each lift is made to order, please allow 3 to 4 weeks for processing.

Included:

Autofabs’ I beam, bent and aligned for 3 inches of lift.
Autofabs’ 3-inch lift coil springs.
Autofabs’ adjustable tie rod.

Reviews

There are no reviews yet.

Be the first to review “1965 – 1979 F100 / F150 2 Wheel Drive Truck 3 Inch Economy Lift”

Your email address will not be published. Required fields are marked *

$1,500.00

Add driver’s side tie rod drag link, inner tie rod end, and adjustment coupler for a completely refurbished steering system.

Add Double Shock Mounts to the front of beams.

If you are sending us your beams to bend, the core charge is not required. Core charge is refunded after we receive your good old beams. It is important to check your beams for a snug fit to the king pin. If the hole is loose the beam is no good.

Autofab recommends replacing your radius arm bushings if they are worn or cracked.

© 2024 Autofab | All Rights Reserved | Designed by SD Internet Marketing