Nicely handcrafted and welded beam pivot brackets for the 1983-97 Ranger 4×4 frame only. We spent many hours working out the location for lift, wheel travel, and the best results from our equal length tie rod steering system. Requires some trimming of the inner frame bottom edge to determine the best up travel. The left side or 3rd member side will dictate final wheel travel figures. The front end will be 8 inches wider than the stock. Use an F150 rear end to match up to the front, change to 1/2 ton 5 on 5.5 wheel bolt circle with much better brakes, stronger hubs, and axles.